You are comparing CompUSA's price ($9.99) with prices from other merchants for:
Packet8 Broadband Phone Service Adapter:
8x8's Broadband Phone Service Adapter ties together a regular phone with a high-speed Internet connection to work with Packet8 service.
By connecting standard telephones (cordless ones and headsets included) with broadband connections (cable or DSL), You have the ability to make phone calls over the Internet at a fraction of the cost of traditional phone services.
8x8's Broadband Phone Service Adapter ties together a regular phone with a high-speed Internet connection to work with Packet8 service.
The broadband phone service adapter can be installed at your premise in minutes.
Equipped with two switched Ethernet ports and two RJ-11 phone service ports, the BPA410 adapter connects with your home router or gateway and your standard, existing telephones.
Because the BPA410 adapters allow you to have two seperate Packet8 service plans - in essence, two phone lines from one box and one broadband connection, you can have two seperate phone calls happening at the same time.
The second Ethernet port can be used for connecting your PC or other networked device without adding an extra Ethernet switch hub.
You can make and receive calls from any telephone in the world.
Using your regular telephone with BPA410 and Packet8 to make Internet phone calls is easier and more natural than using a computer with a microphone and speakers.
Hardware Features: Audacity-T2U processor IC 384 Kbyte on-chip SRAM, 16-way interleave 16 Kbyte, 2-way set associative cache for external FLASH 32 channel DMA engine 6.4 GB memory controller 2 MB FLASH 2 Ethernet 10/100 Base-T MACS Multimedia codec compatibility via TDM port 6 indicator lights for Power, Link, Line 1/2, and Message 1/2 User configurable Software Features: SIP call signaling protocol stack IETF RFC2543 IETF RFC2833 T.38 Fax Relay ANSI C implementation Downloader application Remote configuration through HTTP Web-based user interface Audio Subsystem: G.711, G.723.1, G.726, G.729A/B G.165/G.168, Line echo cancellation Tone generation: dial, busy, ring-back Dynamic jitter buffer DTMF detection/generation Inband and out-of-band DTMF support Voice activity detection Comfort noise generation FAX/modem tone detection Caller ID generation (FSK) Network Layer: HTTP, RTP, RTCP, TFTP, TCP, UDP, DHCP, DNS, ARP, ICMP, NTP, IGMPv2, 802.1 P/Q (VLAN) Specifications Dimension (H x W x D) : 1.22 x 6.69 x 4.72 inches Weight: 9 oz.
(approx.) Power consumption: 3.5W to 4.5W (idle to peak) DC input voltage: +12V, 1.0A Power adapter: Universal, 100-200Vac 47-63Hz input 4.0 x 2.0 x1.4 in, 6.5 oz, ~5ft DC cord, 6ft AC cord Ring voltage: 45Vms typical (balanced ringing) Ring waveform: Sinusoidal Max ringer load: 3REN On hook voltage: ~48V (nominal) Off hook current: 20mA 2 RJ11 FXS port impedance: 600 ohm resistive Note: This adapter is necessary to use Packet8 Residential and Virtual Office services.
|
 |
